TOA BS-633A 6W WALL MOUNT BOX SPEAKER

SKU 487044
Features

The BS-633A is a wall-mount 5 (12cm) cone-type speaker with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

Version with attenuator (volume control) also available; BS633AT

 

Specification  
Rated Input 6W (100V line), 3W (70V line)
Rated Impedance 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W)
Sensitivity (1W, 1m): 91dB
Frequency Response 120 – 15,000Hz (–20dB)
Speaker Component 5 (12cm) cone-type
Applicable Cable 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion Push-in connector (bridging terminal)
Operating Temperature –10°C to 50°C (14°F to 122°F)
Finish Case: ABS resin, off-white
Rear board Hard board
Dimensions 173 (W) × 195 (H) × 101 (D) mm(6.81 × 7.68 × 3.98)
Wall Mounting Case front mount 184mm (7.24)
Dimensions Fixing hole mount: 120mm (4.72)
Weight 780g (1.72 lb)
Accessory Speaker mounting screw (4 × 35 (0.16 x 1.38)) × 2, Speaker mounting screw (4 × 16(0.16 x 0.63)) × 2
The BS-633A is wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker.
  • Wall mount speaker
  • 6W, 3W and 1W taps, 100V line
  • 12cm (5) single cone
  • Cost effective
  • Ideal for paging and BGM
  • Single carton: 230 x 233 x 225 mm 0.9 kg
  • Master carton: 235 x 235 x 235 mm 2 kg
  • Master carton quantity: 2
Vendor Item No. BS-633A