TOA A-2120DT-AS 2CE 120W MIXER AMP W/ TONES 100V
The A-2000DT Series is a range of high performance mixer power amplifiers designed for broadcasting paging or background music in schools, offices, shops and factories. Equipped with balanced microphone inputs for better isolation from external noise, compared to unbalanced inputs, the A-2000DT Series is suitable for AC operation and comes with power outputs from 120 W to 240 W. It is finished with a scratch and fingerprint-resistant surface for easy handling as well as quick volume control with master volume knob.
FEATURES
- 6 on board tones; chime, bell, alert, evac, lockdown and all clear
- 3 microphone inputs, 2 AUX input and 1 recording output
- Speaker output of constant voltage distribution system (100 V)
- Independent tone control of boost and cut type for both high and low frequency
- MIC 1 with phantom power and VOX mute function
- Current limiter to prevent damage due to current overload
- Excess heat limit to protect the transistor and power transformer
- Finished with a scratch and fingerprint-resistant surface for easy handling
Use MB25B (sold seperately) for rackmounting.
Note this is the new Class D model with the following differences over the analogue models;
- Tones (6); Chime, bell, alert, evac, lockdown and all clear tones on board. Triggered via contact closure.
- VOX muting on mic 1
- High (100V line) output only - no low impedance output
- 240VAC operation only
Available models:
- A2030D - 30W output power
- A2060D - 60W output power
- A2120D - 120W output power / A2120DT - 120W output power with tones
- A2240D - 240W output power / A2240DT - 240W output power with tones
Accessories
We also stock the A2060 and A2120 (analogue models) with low impedance output and 24V DC operation if required.
| Specification | |
|---|---|
| Power Source | 220 - 240 V AC, 50 / 60 Hz |
| Rated Output | 120W |
| Power Consumption | 30 W |
| Distortion | Less than 1% at 1 kHz, 1/3 Rated Power |
| Input | MIC 1 – 3: -60 dBV, 600 Ω, balanced AUX 1, 2: -20 dBV, 10 kΩ, unbalanced, RCA Pin Jack
AUX1, 2: -20 dB*, 10 kΩ, unbalanced, RCA Pin Jack |
| Output | High Impedance: 83 Ω (100 V)
Speaker out: Balanced (_x001D_oating) / Rec out: 0 dB*, 600 Ω, unbalanced, RCA Pin Jack |
| Phantom Power | DC + 21V (MIC 1) |
| S/N Ratio | Over 60 dB |
| Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz |
| Muting | MIC1: Mutes other signals by 0 – 30 dB attenuation |
| Indicator | Power signal, peak |
| Finish | Panel: ABS resin black / Case: steel plate, black |
| Dimensions | 420 (W) x 100.6 (H) x 280.3 (D) mm |
| Weight | 4.6kg |
- 120W single zone mixer amplifier (Class D model)
- 5 inputs; 3 mic (XLR) and 2 line level (RCA)
- Chime, bell, alert, evac, lockdown and all clear tones on board
- VOX muting on mic 1
- High
- Single carton: 430 x 500 x 170 mm 5 kg
- Master carton quantity: 1